Rabbits: Digital Files for Papercraft. Printable PDF Template. DIY 3d Sculpture of Bunny Low Poly Model.

Files for making the rabbits from paper.

The final size of the model:
Rabbit S: 49 x 22,5 x 45,5 cm.
Rabbit M: 63 x 22,5 x 44,5 cm.
Rabbit L: 70 x 25 x 50 cm.

Complexity: high

Files included:
- PDF Eng Instructions;
- PDF file for print;

Paper needed:
- Density 250-300 gr/m ²;
- Sheet must be either А4 (210 x 297 mm) or А3+ (320 x 450 mm);
- With А4 you will need: 56 sheets for a monochromatic rabbits;
- With А3+ you will need: 22 sheets for a monochromatic rabbits;
- With А4 you will need: 9 white, 3 pink and 44 brown sheets for colorfull rabbits;
- With А3+ you will need: 4 white, 1 pink and 17 brown sheets for colorfull rabbits.

You will also need:
- Sharp edged knife;
- Metal ruler;
- Glue (for example UHU or PVA wood glue);
- Cutting surface (this could be glass, an old piece of linoleum, or a clean kitchen cutting board);
- Black highlighter.

What to do:
- Print the template (the size of the finished model made with А4 is same as the one that made with А3);
- Cut along solid lines;
- Paint the eyes by highliter on the fron side;
- Incise along dotted lines;
- Bend along dotted lines;
- Glue according to numeration.

Video tutorial: https://vimeo.com/290165112

Designer: Natalia Pogudina. Use of our intellectual property for profit is prohibited. All rights reserved. Please feel free to contact us info [!at] polygonalpaper.com

Paper templates are in PDF, optimized for printing and cutting by hand. Drawings and instructions are designed to ensure that any adult is able to create the sculpture of their choice. To assemble a model you do not need special skills, only your carefulness is needed. The build time of this model is 40 hours. I recommend you divide the assembly process for a couple of quiet evenings, in a calm environment you can rest from everyday problems and devote yourself to the creative process of creating a model.