Eagle Mask PDF template, DIY papercraft, Polygonal, Origami, 3d Mask, Pdf, low poly, Pepakura, 3d mask, paper bird

The mask is polygonal. Template for assembling an aggressive shark from cardboard. The mask has a good view. This is a very recognizable aggressive image.
The size of the mask is very comfortable. The set also comes with a head ring that can be adjusted to any size. The Pepercraft mask is not tight, so the mask is attached to a special ring and will sit equally comfortably on any head. All masks have been tested for good visibility, the eye holes are at the right height in this polygonal mask.

13 pages A4 PDF
1 teeth
2 gums
3-4 white
5-13 gray
+ Step-By-Step Instruction + Visual Instruction

All masks are standard size and fit for adults. But if you zoom out by 10% or 20% when you print, the mask will be smaller and better suited for children.
There is a lot of free space inside the mask, so a cardboard ring is used to attach to the head, a ring template is included. You can easily fit the head ring to your size and then simply glue it inside the finished mask. The ring must be glued in such a way that you can clearly see through the eyes of the mask.

To assemble papercraft, you need to have scissors, a knife for cutting paper and cardboard, a ruler and a dotting pen, a printer. You will also need a glue that you like to use more.
1. I recommend using hot glue at low temperature.
2. For cardboard, I recommend using at least 240 g/m2, most often I use 300 g/m2. Why do I suggest not to use less than 240, because the mask does not work well, does not hold its shape and is crumpled in the hands.
3. If this is your first job, then it is better to stock up on more time and patience. Approximately 2-4 hours for a beginner. But it can be faster if you have good tools and gluing is fast.
You will work with a paper project in 5 steps. 1- Print, 2- Run the lines of future bends to bend beautifully, 3- Cut, 4- Lay out the parts numbered from 1 and further in ascending order (All parts are numbered from the beginning of the assembly, the letters A and B indicate the symmetry of the part), 4 - gluing stage.

All electronic templates are prepared following the correct assembly algorithm. We number the parts in the order of assembly and also place the flags for gluing in the right direction. Thus, the surface on which you will apply the adhesive is always available to you, even in complex projects. This makes it easy to glue using Hot Melt Adhesive or other adhesives.

All our projects are quality tested. The polygons are perfectly flat, so you can be sure that everything will work out perfectly for even hard materials. You can also use any materials such as plastic mirror and eva foam.

Thank you! Write to us. Your feedback is important to us so we can improve!

Our papercraft masks are great for making costumes. You can create your own low poly mask and use it as a gift. This is not exactly origami, it is better to call it a 3D cardboard mask, which is created from a 3D polygonal model. You can easily download the pdf template and start building right away, it's a very quick way to make your own masks. Our masks are suitable for Halloween, theme parties, mannequin decorations, etc. We pay great attention to patterns, make them easy and comfortable, so even complex masks can become papercraft for kids. It is very nice to make a paper mask with your own hands and put it on a masquerade.